What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 20.06.2025 02:57

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
[old diagram got deleted by accident]
nine
What is lightning?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Have you been with a stranger yet?
but this device (an Inductor) … impedes the rapid changes in the current.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Is the Philippines PH a poor 3rd world or 4th world country forever and forever?
eight
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Barnstars:
This is 'the assistant's answer'
Edit 2024–10.
Now when you have a certain ac resistance, then a current flows in a loop.
What is the most inappropriate thing your wife has done in front of you?
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
(Dc diagram shown, AC is similar).
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
What is the best way to end a relationship with someone who has future plans with you?
This device then solves the entire problem.
So, the voltage could go up to 500 volts, and the fuse will not open up.
The MOV will conduct when the voltage exceeds 50% of line voltage.
Why do women consider 80% of men as unattractive?
The other is “what does a “fuse” do?”
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
‘Razor Blade Throat’ Symptoms As ‘Nimbus’ COVID-19 Variant Spreads - Forbes
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
A circuit breaker is similar, but is resettable.
the problem then depends on "how fast does the fuse operate?".
OnePlus Watch 3 gets a smaller 43mm size alongside new Buds 4 in the US next month - 9to5Google
These devices are installed between the “hot” and “neutral” and protective ground.
Upvotes:
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
2024–10–14 [Omar Gharbi Omar Gharbi ]
This is where the MOV conducts again, and dissipated the energy.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
An AC voltage/ current source, and an ac inductive load.
First Sentence:
What are some ways to improve speed in sprinting, running uphill, and long/middle distance running?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Because the load is inductive, the current lags the voltage.(by a bit).
These are simplified answers to the original question, and does not change anything I wrote above.
He then describes Rainy Season and Lightning.
The bolt then partially travels down the line to your home.
But… the neutral is now “floating” because of the 1 ohm resistance.
How do you get a girl to like you?
There are two important concepts here.
But it can get overloaded, and no longer works.
In schematic diagrams this is the symbol for a fuse:
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
What does a fuse do?
2024–10–16 [ OO OLAOYE OYEBODE ]
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
a photo is worth a thousand words.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
One is “what exactly is in a ‘surge protector’ ? ”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
I post the exact comment here.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Here is a simplified AC power diagram.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
It also is a device that limits the change in current flow.
For this case there are devices called Metal oxide varistors (MOV).
what exactly is a ‘surge’ protector?
He then describes the function of a fuse.
so, what happens?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
At least they know the answer if they wanted it.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
He then asserts :
This is where this question deviates from being a 'generic' question, and becomes more specific.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
[image of Common-mode choke]
but I think this circuit , shows a few more pieces.
It seems Mohan does not understand the difference between a comment and an Answer.
This one hit behind the barn.
One
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
2024–10–10[John johnson John Johnson ]
At one ohm, the resistor has a maximum of 1 watt power.
The third is lightning and “how it gets conducted into a home.”
There are three different concepts here that are getting confused.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
A fuse is a non-resetable over current circuit protector.